Last updated: September 11, 2026.
Quick Answer: No mainstream brand sells a therapy panel with infrared LEDs only and no red option — the real way to get an infrared-only session is a dual-wavelength panel with independent controls. The Mito Red Light MitoADAPT MIN 4.0 ($549) has the most precise infrared-only capability, with two dedicated NIR-only modes on their own circuits. The Hooga HG300 ($199) gets you there on a budget with a simple red/NIR power switch, and the PlatinumLED BioMax 600 ($1,049) lets you dim the red array to zero while running near-infrared at full strength.
“Infrared light therapy panel” is a popular search, but the panel it implies — infrared LEDs with no red light built in at all — doesn’t really exist as a wellness product. What buyers actually want is a way to run near-infrared on its own, and that comes from a dual-wavelength panel with the right controls, not a single-wavelength device. We compared the panels that handle this best, from a basic on/off switch to a panel with fully isolated infrared-only modes, so you can pick the one that matches how completely you want the red light to shut off.
Infrared-only panels, by the numbers
- Red and near-infrared occupy different bands: according to the Cleveland Clinic, red light therapy typically uses 630-700nm (visible red) and 700-1000nm (near-infrared) — everything above roughly 700nm is invisible to the eye, which is why a true infrared-only session produces no red glow at all.
- The MitoADAPT 4.0 puts each wavelength on its own circuit: Mito Red Light’s flagship panel has 8 independent wavelength circuits unlocking 11 selectable modes, including Mode 9 (850nm/940nm) and Mode 10 (810nm/830nm) that fire near-infrared only, per Mito Red Light — a genuinely isolated infrared-only session, not a dimmed-down combo.
- PlatinumLED’s BioMax dims by array, not by single wavelength: per PlatinumLED, the BioMax’s R+ (630/660nm red) and NIR+ (810/830/850/1060nm) arrays can each be digitally dimmed from 0-100% independently — enough to zero out red entirely, though you can’t isolate one NIR wavelength like 850nm from the others in that group.
- A basic power switch is the budget path: the Hooga HG300 (660nm/850nm, $199 per hoogahealth.com) ships with separate red and near-infrared power switches rather than a dimmer, so infrared-only is a simple on/off toggle rather than a graduated mode.
- What shows up under “infrared panel” on Amazon is often the wrong product entirely: searches for 850nm infrared panels surface security-camera night-vision illuminators alongside therapy panels — those carry no FDA registration and no therapeutic irradiance testing, and are built for camera lighting, not skin exposure.
Our top picks at a glance
| Panel | Best for | How it goes infrared-only | Wavelengths | Price |
|---|---|---|---|---|
| Mito Red Light MitoADAPT MIN 4.0 | Best true infrared-only modes | 2 dedicated NIR-only modes, independent circuits | 8 (590-940nm) | $549 |
| Hooga HG300 | Best budget switchable | Separate red / NIR power switches | 660 / 850nm | $199 |
| PlatinumLED BioMax 600 | Best group-level dimming | R+ / NIR+ arrays independently dimmable 0-100% | 630/660/810/830/850/1060nm | $1,049 |
1. Mito Red Light MitoADAPT MIN 4.0 — Best True Infrared-Only Modes
Mito Red Light MitoADAPT MIN 4.0
- 8 wavelengths (590, 630, 660, 670, 810, 830, 850, 940nm) each on an independent circuit, per Mito Red Light.
- 11 selectable modes, including two dedicated infrared-only modes with zero red LEDs active.
- Mode 9 (Deep NIR, 850/940nm) targets the deepest tissue penetration; Mode 10 (Core NIR, 810/830nm) is a lighter infrared-only option.
- IEC 60601 medical-grade electrical safety build, controlled via touchscreen and app.
The MitoADAPT 4.0 is the only panel on this page where infrared-only isn’t an improvised setting — it’s a designed feature. Per Mito Red Light, each of its 8 wavelengths sits on its own circuit, and two of the 11 pre-built modes (Mode 9 and Mode 10) fire only the near-infrared wavelengths, leaving every red LED off. That means a genuinely dark, glow-free session at full near-infrared output, not a dimmed-down version of the combined spectrum. It’s also the panel most likely to satisfy someone who read a study protocol calling for a specific NIR band and wants to match it without red light interference. The tradeoff is price and complexity — you’re paying for 8 wavelengths and an app when two would cover the infrared-only use case — but for precision, nothing else here comes close. See our full Mito Red Light review for how the MitoADAPT compares to the brand’s MitoPRO+ and MitoPRO X lines.
Prefer not to wait on shipping? Get your red light panel in two days — try Amazon Prime free for 30 days (sponsored).
2. Hooga HG300 — Best Budget Switchable
Hooga HG300
- 660nm red and 850nm near-infrared LEDs, each on its own power switch, per Hooga.
- Flip the red switch off and the panel runs 850nm near-infrared only — a simple, reliable infrared-only toggle.
- Rated over 73 mW/cm² at 6 inches with 60 individual LEDs and a built-in timer.
- No dimming or in-between modes — it's fully on or fully off per wavelength, not a graduated infrared-only option.
If you just want to flip red light off and run near-infrared alone without paying for a multi-mode touchscreen panel, the HG300 does the job for a fraction of the MitoADAPT’s price. According to Hooga, the red and near-infrared LEDs run on independent power switches, so turning off the red side leaves the full 850nm array running at rated output — over 73 mW/cm² at 6 inches. It’s a blunt tool next to the MitoADAPT’s isolated modes (you get one infrared wavelength, not a choice of two), but for the common case of “I want NIR without the red glow,” a $199 panel with a physical switch is hard to beat on value. See our full best red light therapy panel guide for how the HG300 stacks up on combined-wavelength use.
3. PlatinumLED BioMax 600 — Best Group-Level Dimming
PlatinumLED BioMax 600
- Six wavelengths split into an R+ array (630/660nm) and an NIR+ array (810/830/850/1060nm), per PlatinumLED.
- Each array dims independently from 0-100%, so red can be zeroed out while near-infrared runs at full strength.
- Wider near-infrared spectrum than the HG300 (four NIR wavelengths instead of one) in a single infrared-only session.
- Can't isolate a single NIR wavelength like 850nm alone — dimming affects the whole NIR+ group together.
The BioMax 600 sits between the other two picks: more capable than the HG300’s simple switch, but less precise than the MitoADAPT’s dedicated modes. Per PlatinumLED, the R+ and NIR+ arrays dim independently from 0-100%, so dialing red down to zero gives you an infrared-only session across four near-infrared wavelengths at once (810, 830, 850, and 1060nm) rather than the HG300’s single 850nm band. What you don’t get is the ability to isolate just one of those NIR wavelengths — the whole NIR+ group moves together. For buyers who already want PlatinumLED’s wider spectrum and FDA Class II registration for combined sessions and just want the option to go infrared-only sometimes, it’s a reasonable middle ground. See our full PlatinumLED BioMax review for the full four-size lineup and independent irradiance testing.
How to choose an infrared-only setup
- Decide how isolated you actually need it: if you just want to skip the red glow, a switch (HG300) or group dimmer (BioMax) is enough. If you’re matching a specific study protocol’s single wavelength, only the MitoADAPT’s dedicated modes get you there.
- Check whether “off” really means off: a true power switch (HG300) fully de-energizes the red LEDs; a dimmer (BioMax) can usually reach 0% but confirm with the manufacturer if that matters for your use case.
- Match wavelength count to your goal: one NIR wavelength (850nm on the HG300) is enough for most general use; multiple NIR bands (BioMax’s four, or the MitoADAPT’s choice of two dedicated pairs) may suit a wider range of tissue depths.
- Don’t buy a camera illuminator by mistake: if a search result for “infrared light panel” links to a security or night-vision category, it’s the wrong product — it lacks the FDA registration and safety testing a therapy panel needs.
- Budget realistically: infrared-only capability spans $199 to over $1,000 here — the feature itself doesn’t require the most expensive panel, so match spend to how much precision you actually need.
Not set on going infrared-only? Our best red light therapy panel guide ranks the same category of panels for combined red-and-infrared use, where the PlatinumLED BioMax 600 is also our top overall pick. Curious how the underlying mechanism works before you commit to any spectrum? Our how does red light therapy work guide breaks down the cytochrome c oxidase pathway behind both red and near-infrared wavelengths. Comparing the two premium brands featured here head to head? Our Hooga vs Mito Red Light comparison weighs the budget-value brand against the wider-spectrum one spec for spec. Treating a deep joint or muscle issue where near-infrared’s extra penetration matters most? Our red light therapy for pain guide ranks devices by how deep they reach. And if you’re weighing a panel against a full sauna cabin instead, our red light therapy vs infrared sauna guide compares the two technologies on session time, price, and what each one actually does.
The bottom line
No mainstream brand ships a red-light-free, infrared-only therapy panel — the closest real options are dual-wavelength panels that let you switch or dim red light off. The Mito Red Light MitoADAPT MIN 4.0 ($549) offers the most precise infrared-only capability with two dedicated NIR-only modes. Budget-conscious buyers get a reliable on/off toggle from the Hooga HG300 ($199), while the PlatinumLED BioMax 600 ($1,049) splits the difference with a wider infrared-only spectrum at a dimmer’s flip. Match the precision you need to your budget, and skip anything marketed as “infrared-only” that isn’t a real wellness brand’s switchable or multi-mode panel.